Monday, December 29, 2008

The Story of 100 Mandala Record Bowls



Today is the day, I am finally going to ship out my big wholesale order of 100 Mandala Record Bowls for Viva Terra. I worked on this order during September, October, and November, finished it on Thanksgiving Day, and now I can finally ship it (they wanted me to wait until after Christmas). After reading the vendor guidelines about 5o times, I am pretty sure I have done everything right with the packing list, box labels, etc., so all I need to do is get it dropped off and I can breathe a big sigh of relief to have it off my hands, allowing me to look ahead to my new spring line.



I have posted some of these pictures in previous blog entires, but I wanted to consolidate the entire process into one story, so here you go, this is how I did it.



I started out with lots and lots of vinyl records. I got a 4' x 8' board at the Home Depot and had them cut it in half to make two manageable 4' x 4' boards. I pounded nails into the board every 12" so that I could hang 16 records on each one. (Here's Julius.)



Then I sprayed the records, 32 at a time, with white primer.


I allowed the primer to dry.

I carefully sealed up the spindle holes of each record, and allowed that to dry.




Here is what a stack of 100 primed, sealed records looked like:




The next step was to paint the base coats. 50 of them were to be green, and 50 of them cream-colored. Each one took two coats of the base color, which meant a lot of drying in between times.

My best friend Melodie helped with the base-coat painting. Thanks, Melle!

Soon the disks were taking over the house. I didn't want to stack them, so it was a bit crazy for a while...

...until I went to Goodwill and got several of these vertical files, which saved the day.


So yeah, the next step (and the most time consuming!) was the painting of the mandala designs onto the record. That's a lot of the same mandala, over and over again. Each one was painted freehand, and a lot of them required two coats, too.


Once I finished the 50 green records, the next step was to form them into bowls, and each one was individually heated and sculpted by hand to make 50 groovy bowls.


The next step was to paint my signature on the bottom of each bowl. I used white and black paint to paint a psychedelic eyeball over each spindle hole, and to paint the words Eye Pop Art somwhere on the record label.




After that dried, I coated the bottoms of the bowls with a protective semi-gloss finish and allowed that to dry.

Then I flipped 'em and proceeded to do the same thing to the tops of the bowls.

Here are the 50 finished bowls, peeking out of their boxes.
Once the 50 greens were out of the way, I had to repeat the whole deal all over again, painting the same mandala design 50 times in green on the cream-colored records.

These also were heated, shaped, etc...



Vanna!
...and the bottoms were done...

...and the tops were done...
...and they were all wrapped in tissue paper and put to bed for a month.

These are the temporary boxes that the order has been living in for the last month. I have since repacked them uniformly into four large boxes, each containing 25 bowls.
Today the 100 bowls will go on a journey, and some time very soon they will make their appearance in the Spring 2009 catalog by Viva Terra! I can't wait to get a copy.

9 comments:

Rose Clearfield said...

Wow, what a project! The bowls look great! :)

Heather "Hev" said...

They are stunning!
They will go like hot cakes I am sure!!

PeppermintDaydreams said...

beautiful work! how lovely that you showed the process too; thanks for sharing.

-Christy

jbramman said...

These are wonderful, I love that you take the time to photograph the process of creating art. You have accomplished quite a lot, I'm glad you shared :)

KerriB said...

Congratulations. They look fantastic.

Unknown said...

Hi! I love your work it's beautiful! I am also making vinyl bowls (though different from yours and I would never attempt to copy your designs!)but I am wondering what you use to fill the hole?

Morningwhispers said...

how can u heat them in the oven with spraypaint is that not dangerous -- with toxic fumes as well as explosive

Missing_Pieces said...

Just wondering what you sealed the holes with...??
Fantastic job! It isn't easy forming them all identically.

Missing_Pieces said...

Just wondering what you sealed the holes with...??
Fantastic job! It isn't easy forming them all identically.